I shop ndustrial M Cheap achine Plastic Drag Chain

Product Description

Basic parameters 

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:

Tensile strength

180N/mm2 Volume resistance 1571-1015
Impact strength 50Kj/m2 Water Absorption 4%
Tenprature range -40.C-130.C Friction factor 0.3
Surface resistaned 1571-1012 Falme resistance HB(UL49)
 

Picture:

 
Advantages

1. It has very nicelooking appearance and has very rationalconstruction and flexible and high strength. It is reliable and easy to operate, install, dismantle or assemble. It is worthwhile mentioning that the antiwearing performance has been improvedgreatlydue to wear resistent material and alloy pin-shaft are used.
 
2. The product is flexible to bending and has low resistance, giving low noises. It can be used for a very CZPT period of time without any deforming or hanging down.
 
3. The product is nicelooking, which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.
 
Feature
 
The feature of the CZPT Plastic Roller Chain Cable Drag Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).
 
Application
The CZPT Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.

Installation 

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a CZPT sliding service,it is recommended to use a guiding grove,Please ask CZPT technical personnel about the usage of the guiding grove.

Order
 
Kindly please advise the below:
 
1. Length: 
2. Cable or pipe CZPT . Dia.:
3. Supporting board type:
 4. CZPT ding Radius(or the curved height ):